Opening the QuickStart Network Plan in 3WXM
9
WX1200-Corp#
save config
Configuring a Member
1
Use the
quickstart
command to configure basic
system parameters on a second switch
(WX1200-Corp2).
2
Configure WX1200-Corp2 as a member of the Mobil-
ity Domain.
WX1200-Corp2#
set mobility-domain mode member
seed-ip 10.10.10.4
3
Verify and save the configuration changes:
WX1200-Corp2#
display config
# Configuration nvgen'd at 2004-10-13 11:23:26
set mobility-domain mode member seed-ip
10.10.10.4
WX1200-Corp2#
save config
Opening the QuickStart Network Plan in
3WXM
3WXM comes with a sample plan called
3ComStarterExample
. This plan contains a simple
rectangle as a floor plan, with one WX1200 switch
and four AP2750 MAPs. The plan uses Web AAA for
guest access and 802.1X for corporate access with
local authentication.
The network plan contains a configuration similar to
the one created by the CLI in the previous sections,
but differs from the configuration by using separate
VLANs for WX management traffic, corporate users,
and guest users. Otherwise, the configuration is the
same.
To open the network plan:
1
Install 3WXM, if not already installed. (See the “Get-
ting Started” chapter of the
Wireless LAN Switch
Manager Reference Manual
.)
2
Start 3WXM by
selecting
Start > Programs >
3Com > 3WXM > 3WXM
, or by double-clicking
the
3WXM
icon on the desktop.
If you are starting 3WXM for the first time, or you
have not entered license information previously, the
License Information dialog box appears. You can view
and modify the WX switch configurations without a
license.
3
Click
Continue
.
4
Select 3ComStarterExample and click
Next
. (For more
information, see the
Wireless LAN Switch Manager
Reference Manual
.)
Copyright © 2004, 3Com Corporation. All rights reserved.
Unless otherwise indicated, 3Com registered trademarks are registered in the
United States and may or may not be registered in other countries.
3Com is a registered trademark of 3Com Corporation. The 3Com logo is a
trademark of 3Com Corporation.
Mobility Domain, Mobility Point, Mobility Profile, Mobility System, Mobility System
Software, MP, MSS, and SentrySweep are trademarks of Trapeze Networks, Inc.
Intel and Pentium are registered trademarks of Intel Corporation. Microsoft,
MS-DOS, Windows, Windows XP, and Windows NT are registered trademarks of
Microsoft Corporation.
All other company and product names may be trademarks of the respective
companies with which they are associated.
