Part No. 730-9502-0048, Revision B
Published November 2004
W
IRELESS
LAN S
WITCH
AND
C
ONTROLLER
Q
UICK
S
TART
G
UIDE
This document describes how to do the following:
■
Use the
quickstart
command to perform basic
system configuration of a Wireless LAN switch (WX)
running Mobility System Software Version 3.0.
■
Configure a Mobility Domain for roaming.
■
Open the sample 3WXM network plan
3ComStarterExample
, which contains the configura-
tion values used in the CLI examples. You can use the
network plan to build on the configuration, if you do
not want to continue to use the CLI.
What Does the quickstart Command Configure?
The
quickstart
command runs a script that interactively
helps you configure the following items:
■
System name
■
Country code (regulatory domain)
■
System IP address
■
Default route
■
Administrative users and passwords
■
System time and date parameters
■
Unencrypted (clear) SSID names
■
Usernames and passwords for guest access using
Web AAA
■
Encrypted (crypto) SSID names and dynamic WEP
encryption for encrypted SSIDs’ wireless traffic
■
Usernames and passwords for secure access using
802.1X authentication using PEAP-MSCHAPv2 and
secure wireless data encryption using dynamic Wired
Equivalent Privacy (WEP)
■
Managed Access Points (MAPs) that are directly con-
nected to WX switches
■
Distributed MAPs, which are connected to WX
switches through an intermediate Layer 2 or Layer 3
network
The
quickstart
command displays a prompt for each of
these items, and lists the default if applicable. You can
advance to the next item, and accept the default if
applicable, by pressing Enter.
Depending on your input, the command also automati-
cally generates the following key pairs and self-signed
certificates:
■
SSH key pair (always generated)
■
Admin key pair and self-signed certificate (always
generated)
