3Com OFFICECONNECT ETHERNET HUB 8, Руководство пользователя, Страница: 74 / 130

4-38 C
H A P T E R
4: M
A N A G I N G
Y
O U R
H
U B
U
S I N G
Q
U I C K
C
O N F I G
M
A N A G E R
2
In the General Info dialog box, choose the WorkGroup
category .
3
In the WorkGroup Monitor panel, click on Add .
Quick Config Manager displays the Add Remote Poll
dialog box, as shown in Figure 4-17 .
4 In the Add/Edit Remote Poll dialog box, enter the IP
or IPX address of the device that you want the hub
to poll.
5
Choose the rate at which the device is to be polled.
If the device is critical to the performance of your
network, select a frequent rate. If the device is not
important or on a remote network you can select a
less frequent rate.
6 Select whether polling of this device is to be enabled
or disabled.
You can have up to 10 polling session entries for the
hub (poll 10 different devices) , all of which can be
enabled. If you do not want to poll a device now but
want to keep its information for future use, you can
simply disable it by selecting Disable.
7 Click on OK .
Figure 4-17 Add Remote Poll Dialog Box
16710.bk : MANAGING.FRM Page 38 Tuesday, October 7, 1997 11:38 AM