3Com OFFICECONNECT ETHERNET HUB 8, Руководство пользователя, Страница: 62 / 130

4-26 C
H A P T E R
4: M
A N A G I N G
Y
O U R
H
U B
U
S I N G
Q
U I C K
C
O N F I G
M
A N A G E R
You can configure a port so that it sends a trap to a
network management application when the status of
the link changes (for example, if a device is
connected to or disconnected from the port), or
when the port partitions. You can also configure a
port to store the source address of frames received
by the port, this enables you to detect which
devices are attached to each port of the hub.
To configure a port:
1 From the View menu, select Zoom In to display the
representation of the hub.
2 Double-click on the port you want to configure.
3 In the Port Configuration dialog box, choose the Info
category.
Quick Config Manager displays the Repeater Port Info
panel, as shown in Figure 4-11 .
4
In the Repeater Port Info panel, select either Enable
or Disable for Port State.
If the port is part of a resilient link, you cannot enable
or disable the port. You must first delete the resilient
link, see “Resilience” on page 4-33 .
Figure 4-11 Repeater Port Info Panel
16710.bk : MANAGING.FRM Page 26 Tuesday, October 7, 1997 11:38 AM