3Com MSH 1005 Скачать руководство пользователя страница 82

Страница: 82 / 155

DUA1840-0AAA01

Resilient Links

3-21

Media Type

Twisted Pair/Fiber

This read-only field shows the standby

port media type.

Link State

Available/Not Available/Not Present

This read-only field hows

the connection state of the standby port in the link:

■

Available

— The port is operating normally.

■

Not Available

— The resilient link pair is disabled.

■

Not Present

— The port is not present in the current hardware.

Standby Links Available

This listbox shows the ports that are available

to set up as standby.

Pair State

Active/Both Failed/Unknown/Not Available

This read-only

field shows the current operating state of the resilient link pair:

■

Active

— The resilient link pair is enabled and operating normally

with both main and standby port capable of carrying traffic.

■

Both Failed

— Although the resilient link is correctly configured,

both links have failed. This could be due to loose connections or

cable damage.

■

Unknown

— The network configuration has changed and the

resilient link pair no longer conforms to the rules.

■

Not Available

— The resilient link pair is disabled.

Active Port

Main/Standby

If your main link fails and the standby link

takes over the traffic, the link will not automatically switch back when

the main link is reinstated. Use this field to manually switch traffic back

to the main link.

Pair Enable

Enabled/Disabled

Use this field to enable or disable the

resilient link pair. If you disable the resilient link pair, you must remove

cabling from the ports to avoid creating loops in your network

configuration.

Содержание MSH 1005




























































































































































Результаты поиска

Содержание MSH 1005

Отзывы:

Бренды по названию

Популярные бренды

3Com MSH 1005, Руководство пользователя

Результаты поиска

Содержание MSH 1005

Отзывы:

Бренды по названию

Популярные бренды