3Com MSH 1005, Руководство пользователя

Страница: 34 / 155

DUA1840-0AAA01
1 - 22 C
H A P T E R
1: G
E T T I N G
S
T A R T E D
5 At the Switch 1005 Main Banner, press [Return] to display the L ogon
screen. Logon using the default name security , and password security.
Select OK.
6 The Switch Main Menu is displayed. From this menu, select the
Management Setup option. The Switch Management Setup screen is
displayed.
7 On the Management Setup screen, fill in the following fields:
■
Device IP Address
■
Device SubNet Mask (if necessary)
■
Default Router (if necessary)
For further information on the Management Setup screen, see “Switch
1005 Management Setup” in Chapter 2.
8 If you need the Switch to send SNMP traps to the network manager,
you may need to setup the address of the network manager in the Trap
Table. See “Setting Up Traps” in Chapter 3.
3Com Network Managers such as Transcend WorkGroup Manager for
Windows may automatically configure intelligent modules to send traps
to them. Please read the documentation supplied with your network
management software.
9 When you have finished with the Management Setup screen, select OK.
Once the module’s IP parameters are specified, you can continue
management using:
■
I n-band management via any SNMP-based Network Manager
application.
■
Out-of-band management via the Switch 1005’s own VT100
management interface.
■
In-band management via the Switch 1005’s own VT100 management
interface.