3Com HomeConnect 3CRWE50194, Руководство пользователя

Страница: 29 / 61

20 C
HAPTER
4: R
UNNING THE
S
ETUP
P
ROGRAM
set the channel, click "Manually"and select the
desired channel.
9 Click "Enter" to proceed to the Wireless LAN Service
Area setup section.
10 If you wish to use a specific WLAN Service Area ID,
select the “Specify” option and enter the desired ID.
The default ID on the unit is “101”.
NOTE: The same ID will need to be configured on your
wireless clients in order for them to connect to the Home
Wireless Gateway.
11 Click “Enter” to go to the “Wireless Setup |
Encryption” screen.
12 If, for security reasons, you wish to use encryption to
transmit your data securely over your Wireless
Network, use one of the following two methods to
set up encryption:
■
Select YES -- generate encryption keys automatically to
allow the Home Wireless Gateway to automatically
generate the encryption keys, OR
■
Select YES -- enter encryption keys manually so that you
may manually generate the keys. To do this, enter 5
hexadecimal digit pairs for each of the 4 keys in the
locations provided.
NOTE: A hexadecimal digit is a number or letter in the
range 0-9 or A-F.
NOTE: If you decide to use encryption, you will need
to have the corresponding keys configured identically
on each of your wireless clients, otherwise the clients
will not be able to connect to the Home Wireless
Gateway.
13 Click "Enter" to complete the Encryption section of
the Home Wireless Gateway setup. The “Setup
Wizard | Finished” screen appears.
14 Click "Save and Restart" to ensure all your settings
have been saved to the Home Wireless Gateway.