Diagnostic Testing Under Windows 3.x
6-5
The main window of the diagnostic program is displayed.
3
From the
Test
menu, select
Echo Server
, and then click
Start
.
A message confirms that your PC is now set up as an echo server.
Starting the Group 3 Test
Follow these steps to run the Group 3 test on the 3C509B NIC:
1
Start the Configuration and Diagnostic Program on the PC
in which the NIC to be tested is installed.
2
From the
Test
menu, select
Test Setup
.
3
Enable the Group 3 test. Select
OK
and press Enter.
4
Go to the Run Tests dialog box to start the tests.
5
After the test is completed:
a
Exit the program on the echo server.
b
Exit the Configuration and Diagnostic Program.
Table 6-1
Diagnostic Programs
Diagnostic
Program Name
NIC Installed
in the Echo Server
3C503.EXE
EtherLink II
®
or II TP, EtherLink II/16 or II/16 TP
3C505.EXE
EtherLink Plus
®
3C507.EXE
EtherLink 16 or EtherLink 16 TP
3C508CFG.EXE
3Com Red
3C5X9CFG.EXE
EtherLink III family
3C523.EXE
EtherLink/MC
3C523TP.EXE
EtherLink/MC TP
3C527.EXE
EtherLink/MC 32
3C59XCFG.EXE
EtherLink III EISA/PCI bus master family (including Fast
EtherLink NIC running at 10 Mbps)
3C90XCFG.EXE
EtherLink XL and Fast EtherLink XL family of NICs
running at 10 Mbps
Book Page 5 Friday, June 11, 1999 3:02 PM
