Changing the Test Setup
5-9
If the working adapter passes all tests, the original adapter is
probably defective. For information on returning products
for repair, refer to Appendix B, “Technical Support.”
6
Install the adapter in another functioning EISA computer
and run the tests again.
Your computer may be defective. If the adapter passes the
tests in the second computer, contact the reseller or
manufacturer of the original computer.
7
Replace all other EISA adapters in the computer and run
the tests again. If the tests pass, the other EISA adapters
may be causing contention.
8
If you experience problems that occur only when using
the AutoLink program, display or print the AUTOLINK.LOG
file as follows:
a
To display the file, type:
type autolink.log | more
b
To print the file, type:
print autolink.log
The AUTOLINK.LOG file contains a log of all the events that
occurred during the AutoLink installation and configuration
process.
Changing the Test Setup
To change the test parameters, follow these steps:
1
Choose
Test Setup
from the
Test
menu in the main
window of the Configuration and Diagnostic Program, or
choose the
Test Setup
button in the Run Tests dialog box.
2
Press [Tab] to highlight any of the fields within the Test
Setup dialog box.
