6
■
If you have routed the Ethernet cable through the center opening, secure the cable on the
hook located on the mounting plate as shown in the illustration below.
2
Connect the Ethernet cable to the Ethernet port on the access point.
3
Connect the power cable to the power port on the rear panel of the access point.
4
Position the access point at an angle to the mounting plate bayonet connection and turn the
unit clockwise until it snaps into place, as shown below.
6
Flat Surface Installation
1
Find a clean and dry surface that is elevated enough to provide good reception and coverage
for the network. Do not place the access point on a metal surface.
2
Make sure to choose a location where the access point will not be disturbed.
3
Connect the Ethernet cable into the Ethernet port.
4
Connect the power cable to the power port on the rear panel of the access point.
5
Set the access point down on a flat, level surface.
A
B
A
B
R
ad
io
E
th
ern
et
P
ow
er
Top opening
Center opening
Hook for securing
the cable
Align with mounting plate
and rotate clockwise to lock
