3Com 4200G Series, Руководство по началу работы

Страница: 47 / 90

Manually Configuring IP Information 47
address and subnet mask that you want the switch to use when it is
connected to the network. The final page displays a summary of the
information entered.
5 Select Save Configuration to save the configuration to your switch.
The initial set up of your switch is now complete and you can now set up
your chosen management method. See “Methods of Managing a
Switch” on page 37.
Using Command Line Interface with Telnet
1 To start a Telnet session to the unit, click Start in Microsoft Windows.
a Click Run .
b In Open field, type the unit’s IP address:
Telnet xxx.xxx.xxx.xxx
(where xxx.xxx.xxx.xxx is the switch’s IP address)
c Click OK .
2 Press Enter to open a login prompt.
If the login prompt does not begin immediately, press Return a few times
until it starts.
3 At the login prompt, enter
admin
as your user name and press Return at
the password prompt. If you have logged on correctly,
<S4200G>
is
displayed as shown in the example in Figure 20.
Figure 20 Logging into User View using Telnet
4 Enter the
system-view
command and press Enter .
5 Enter
interface vlan 1
and press Enter .
10014914_AB_Switch 4200G.book Page 47 Tuesday, October 2, 2007 12:13 PM