3Com 3CR990, Руководство пользователя

Страница: 31 / 90

Windows 95 31
Update Device
Driver Wizard
If the Update Device Driver Wizard starts, follow this procedure to install the
NIC driver:
1 Insert the EtherCD in the CD-ROM drive, and then click Next .
Windows finds the driver.
2 Click Finish .
■
If networking has already been installed on your PC, go to step 4.
■
If this is the first time that networking is being installed on your PC, the
Identification tab of the Network screen appears. Go to step 3.
3 In the specified fields of the Identification tab screen, enter the following
information, and then click
Close .
■
Computer Name —Identifies the PC on the network for other users. This entry
must be a unique name of 15 characters or fewer, containing no spaces.
■
Workgroup —Identifies the group (for example, your department name)
to which your PC belongs. If your computer is connected to a peer-to-peer
network, this entry must be exactly the same for all the PCs in your network.
■
Computer Description —Displays additional details to other users on
the network about this PC. For example, you could specify that the PC
is connected to a printer. Filling in this field is optional.
4 The Insert Disk screen appears, prompting you for the EtherCD . Click OK .
The Copying Files screen appears.
5 Enter the path to the CD-ROM drive, and then click OK .
Files are copied. The Insert Disk screen appears, prompting you for the
Windows 95 CD-ROM.
6 Click OK .
The Copying Files screen appears.
7 Do one of the following:
■
If the Windows 95 files were not copied to your hard drive, remove the
EtherCD from the CD-ROM drive, insert the Windows 95 CD, enter the path to
the CD-ROM drive, and then click OK .
■
If the Windows 95 files were copied to your hard drive, enter the path to the
directory containing these files, and then click
OK .
Files are copied. The Systems Settings Change screen appears, prompting you to
restart your computer.
8 Click Yes .
The driver installation is complete. To verify that the installation was successful
Go to: Verifying Successful Installation
.
NOTE: You must restart your computer to complete the installation.
NOTE: After Windows restarts, double-click the Network icon in the Windows
Control Panel and make sure that the configuration settings are properly set for
your network environment. Contact your system manager for assistance.