3Com 3CCE589EC, Руководство пользователя

Страница: 47 / 62

37
Setting a dRMON Password
To promote secure monitoring with dRMON, you can set a
password for the dRMON Dynamic
Access software.
If you do not choose to set a password, the end node PCs
will have the default password for the Edge Monitor. Use
this same password for the Dynamic
Access software.
To set the password for secure monitoring:
1 Run the KEYGEN.EXE file.
The KEYGEN.EXE file encodes the password into the
KEYSET.EXE file.
2 Enter your password in the dialog box.
3 Record your dRMON Edge Monitor System password
in a safe place.
4 Click OK.
Be sure to insert the KEYSET.EXE file in the login script
and run it before you run the DA15CFG.EXE file. Upon
completion, the KEYSET.EXE file asks you to reboot.
5 Reboot the notebook.
If you enter the password, you can correct it and run the
KEYSET.EXE file again from the login script if the end nodes
have not been discovered by an Edge Monitor. If the end
nodes have been adopted by an Edge Monitor, you can
pause the Edge Monitor while you run the KEYSET.EXE file
again from a login script to set the correct password.
Be sure to visit the 3Com Web site for additional postings of
FAQs for the Edge Monitor System and new Dynamic
Access
software versions and information at:
http://support.3com.com/nav/trans_net_man.htm
http://www.3com.com/dynamicaccess
http://support.3com.com/nav/dynamic_access.htm
Downloaded from www.Manualslib.com manuals search engine