manualshive.com logo in svg

3Com 3C888 - OfficeConnect Dual 56K LAN Modem Router, Руководство пользователя

Поделиться
Скачать
3Com 3C888 - OfficeConnect Dual 56K LAN Modem Router Скачать руководство пользователя страница 75

Configuring Additional Service Providers

75

With NAT enabled, the LAN Modem makes translations between a single 
(Internet-routable) IP address issued to it dynamically by the ISP and individual IP 
addresses of the computers on the LAN (these are also dynamically assigned, but 
by the LAN Modem). This translation allows multiple users on the LAN to access 
the ISP by appearing to be a single connection with a single IP address. To better 
understand how NAT translation works, refer to the description of NAT in 
Appendix A, “Networking Primer.”

14

In the WAN Link IP Address and Subnet mask fields, if the ISP to which you are 
connecting assigns you a static IP address and subnet mask, enter those values 
here. Otherwise, leave these fields empty.

15

For Allow Automatic Call Initiation, leave the default setting which is 

Yes

.

If you select 

No

, you will have to manually launch a call to this service provider 

every time you want to connect. You may want to change this field to 

No

 later on 

if you find that calls are being connected unintentionally as a result of packets 
generated by other computers on the LAN.

16

In the Default Workstation for Incoming Packets field, specify the workstation to 
which all unsolicited TCP/UDP packets should be delivered.

Note that if the Enable Intelligent NAT field is set to 

Yes

, the LAN Modem first 

attempts to deliver the unsolicited TCP/UDP packets to the workstation that is 
currently communicating with the remote host that has generated these packets. 
Only if no such workstation is found are the packets delivered to the specified 
default workstation.

17

For Enable Intelligent NAT, it is recommended that you leave the default setting, 
which is 

Yes, 

in order for the LAN Modem to better support Internet applications 

and games.

The LAN Modem delivers all unsolicited TCP/UDP packets to the workstation that 
is currently communicating with the remote host that has generated these 
packets. If you set this field to 

No

, all unsolicited TCP/UDP packets are delivered to 

the default workstation.

18

In the Default Workstation for Incoming Packets field, specify the workstation to 
which all unsolicited TCP/UDP packets should be delivered.

Note that if the Enable Intelligent NAT field is set to 

Yes

, the LAN Modem first 

attempts to deliver the unsolicited TCP/UDP packets to the workstation that is 
currently communicating with the remote host that has generated these packets. 
Only if no such workstation is found are the packets delivered to the specified 
default workstation.

19

Click 

Submit.

20

Advanced users can review or make changes to the V.90 modem settings 
associated with this service provider by clicking the 

Modem Settings

 button. To 

leave these values set to their defaults, click 

Submit. 

To change these settings, 

refer to 

“Configuring V.90 Modem Control Parameters

.”

21

To configure a connection to another ISP, repeat steps 1 through 19. 

If your service provider requires that you create a connection script, refer to “Using 
a Connection Script”.

If you wish to password-protect the configuration profile of the Dual 56K LAN 
Modem, refer to “Locking and Unlocking the Configuration.”

Содержание 3C888 - OfficeConnect Dual 56K LAN Modem Router









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды