3Com 3C888 - OfficeConnect Dual 56K LAN Modem Router, Руководство пользователя

Страница: 53 / 168

The LAN Modem Main Configuration Page 53
Setting Up Additional
Service Provider Profiles
Now that you have finished configuring your Dual 56K LAN Modem, you can set
up a total of four additional
Service Provider profiles. The LAN Modem defines
any remote dial-out destination (including the ISP profile you just configured) as a
Service Provider. The LAN Modem recognizes two categories of Service
Providers:
■
Internet Service Providers (ISPs), for connection to the Internet (such as that
created by the ISP Wizard).
If you have another Internet Service Provider account and would like to
configure a second Internet Service Provider profile, refer to Chapter 7,
“Configuring Additional Service Providers.” You will see the name of the ISP
that you just configured listed in the Service Provider profile list.
■
Private Network Service Providers, for connection to a remote Private
Network, such as a corporate office LAN (this can include indirect access to the
Internet through the corporate LAN’s Internet connection).
If you would like to set up a connection to a remote Private Network, refer to
Chapter 6, “Configuring the Dual 56K LAN Modem for Private Network
Access.”
Configuring Additional
LAN Modem Parameters
The configuration you just performed guided you through the basic parameters
that were needed to connect you to your ISP. There are additional parameters for
this ISP connection which were automatically set to default values during the
configuration which you change or adjust. These parameters include Domain
Name, Compression, NAT, and WAN Link IP Address, as well as an alternate or
Multilink ISP telephone number with which your ISP may have provided you. For
information on these parameters and changing their default values, refer to
Chapter 7, “Editing Service Provider Profiles.”
The LAN Modem Main
Configuration Page
Now that you have performed the initial configuration of the LAN Modem, any
further configuration of the unit — adding additional Service Providers,
configuring advanced parameters, or changing current parameters — is handled
through the Dual 56K LAN Modem’s
Main Configuration Page, also called the
WebWizard. The Main Configuration Page is shown in Figure 34.