Features
1-3
Features
■
Parallel Tasking
®
II architecture for greater network
speed.
■
Power savings (when there is no network activity, the
3C589D PC Card turns off power to itself).
■
Compliance with 10BASE-T and 10BASE2 standards.
■
Integrated Card Services support.
■
“Hot Swap” support (you can remove and replace the
PC Card without rebooting the PC if you have Card
Services installed).
■
Driver support for Microsoft
®
(NDIS) and Novell
®
NetWare
®
(ODI) networks.
■
Automatic PC Card configuration (AutoLink
™
program)
for Novell NetWare DOS ODI.
■
Windows
®
95 Plug and Play support.
■
EtherDisk
®
diskette containing the 3C589D PC Card
software, network drivers, and text files that contain
technical information about the 3C589D PC Card.
■
Network management capabilities using 3Com’s
Transcend
®
PC Link SmartAgent
™
software. (Refer to
the
3Com Transcend PC Link SmartAgent Software User
Guide
for more information.)
Requirements
Make sure your PC meets the following requirements:
■
PC Card (PCMCIA) Type II or Type III card slot and a
3 1/2-inch diskette drive.
■
Windows or DOS 3.1 and higher.
■
80386 or higher processor.
■
450 K of lower memory available to run the installation
software.
■
Access to a network port for a network connection.
Call your MIS representative to get a network port.
The EtherDisk diskette contains a README.TXT file that
describes important information that became available
after this guide was printed.
