3Com 3C410012A - OfficeConnect Remote 531 Access..., Руководство по началу работы

Страница: 28 / 72

2-2 C
HAPTER
2: I
NSTALLATION
Siting OfficeConnect Remote
When siting OfficeConnect Remote, ensure:
■
It is accessible and cables can be easily connected.
■
It is out of direct sunlight and away from sources of heat.
■
Cabling is away from power lines, fluorescent lighting fixtures,
and sources of electrical noise such as radios, transmitters and
broadband amplifiers.
■
Water or moisture cannot enter the case of the unit.
■
Air flow around the unit and through the vents in the side of the
case is not restricted. We recommend that you provide a
minimum of 25mm (1 inch) clearance around the unit (or stack).
To prolong the operational life of the equipment:
■
Never stack OfficeConnect units more than four high, and ensure
that they are clipped securely together.
■
Do not place objects on top of any unit or stack.
Siting OfficeConnect Remote on a Desk
If the OfficeConnect Remote is to be sited on a desk or table, units
may be stacked on top of each other. The following equipment is
provided for this purpose:
■
Four stacking clips to secure the units.
■
Rubber feet for stability.
The Rubber Feet
The self-adhesive rubber feet prevent the unit from sliding around on
a desk. Use them on a single unit, or on the bottom unit of a stack.
Stick the feet to the marked areas at each corner of the underside of
the unit (
Figure 2-1 ).
getstart.bk : INSTALL.FRM Page 2 Friday, October 3, 1997 10:40 AM