3-4
C
HAPTER
3: I
NSTALLING
THE
N
ETWORK
D
RIVERS
TokenDisk
diskette #2 contains the device driver for
Windows 95. It is recommended that you use the
Windows 95 3C389 PC Card support software.
There are two versions of Windows 95: the original
version shipped in August 1995 and the OEM Sales
Release 2 (OSR 2). The driver installation instructions
are slightly different in the two versions.
1 Determine if you have OSR 2.
Click Start, Settings, Control Panel, and System.
If the system version number is 4.00.950 B, you are using
OSR 2. If it is 4.00.950 A or just 4.00.950, you are using
the original version of Windows 95.
If you are running OSR 2, use the instructions in
“Windows 95 OSR 2 Installation” later in this chapter.
Otherwise, perform the following instructions.
2 If you have not already inserted the 3C389 PC Card,
insert it now with the cable attached.
The PC does not detect the 3C389 PC Card if the cable is
detached.
If PCMCIA support has been started on your machine,
the system will prompt you for a diskette.
If PCMCIA support has not been started on your
machine, do the following sub steps.
a
Click
Start
,
Settings
, and
Control Panel
.
b
Click
PC Card
(PCMCIA) to start PCMCIA support, and
follow the instructions given.
3 Insert TokenDisk diskette #2 into the appropriate
floppy drive and press [Enter].
4 Type
a:\win95 [Enter]
5 Set the displayed parameters.
The system will list acceptable default values.
6 Follow the instructions to copy the files.
