manualshive.com logo in svg

3Com 3C17205 - SuperStack 3 Switch 4400 PWR, Руководство по началу работы

Поделиться
Скачать
3Com 3C17205 - SuperStack 3 Switch 4400 PWR Скачать руководство пользователя страница 64

64

A

PPENDIX

 A: S

AFETY

 I

NFORMATION

Important Safety Information

WARNING:

Installation and removal of the unit must be carried out by 

qualified personnel only.

WARNING:

If installing the Switch 4400 in a stack with SuperStack II or 

SuperStack 3 units that are narrower than the 4400, the Switch 4400 
unit must be installed below the narrower units.

WARNING:

The unit must be earthed (grounded).

WARNING:

Connect the unit to an earthed power supply to ensure 

compliance with safety standards.

WARNING:

Power Cord Set:

This must be approved for the country where it is used:

WARNING:

The appliance coupler (the connector to the unit and not the 

wall plug) must have a configuration for mating with an EN60320/IEC320 
appliance inlet.

U.S.A. and 
Canada

■

The cord set must be UL-approved and CSA certified.

■

The minimum specification for the flexible cord is:
No. 18 AWG
Type SV or SJ
3-conductor

■

The cord set must have a rated current capacity of at least 
10A.

■

The attachment plug must be an earth-grounding type 
with a NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A, 
250V) configuration.

United 
Kingdom only

■

The supply plug must comply with BS1363 (3-pin 13 amp) 
and be fitted with a 5A fuse which complies with BS1362.

■

The mains cord must be <HAR> or <BASEC> marked and 
be of type H03VVF3GO.75 (minimum).

Europe only:

■

The supply plug must comply with CEE 7/7 (“SCHUKO”).

■

The mains cord must be <HAR> or <BASEC> marked and 
be of type H03VVF3GO.75 (minimum).

Denmark

■

The supply plug must comply with section 107-2-D1, 
standard DK2-1a or DK2-5a.

Switzerland

■

The supply plug must comply with SEV/ASE 1011.

DUA1720-3AAA06.book  Page 64  Thursday, June 5, 2003  4:01 PM

Содержание 3C17205 - SuperStack 3 Switch 4400 PWR



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды