3B LASER PEN 200, Руководство по эксплуатации

Страница: 8 / 23

You can turn around the display (right-handed/left-handed users) with the “+” key (2). The sound (which is
issued every 20 s during laser discharge) can be turned on and off with the “-” key (2). When the loudspeaker
icon is crossed out, the sound is turned off.
By pressing the “SET” key you can then have the current parameters (initial setting) of the unit shown as follows:
60.0J
CW
The display always shows the values for laser power, point search mode, therapy program, and energy dose
rate that were selected last (stored).
When the unit is operated for the first time, the maximum output (200 mW), the operation mode CW, point
search mode OFF (0) and the energy dose rate 60 J (Therapy time 5 min.) are always preset.
The parameters can be modified as explained in the chapter “Changing the Laser Parameters”.
The laser discharge is started as explained in the chapter “Using the Laser”.
Changing the Laser Parameters
When the SET key (3) is pressed, the output value flashes as in the illustration below and can be changed with
the “+” and “-” keys (2). The settings can be 100 / 200 mW.
60.0J
CW
By pressing the SET key (3) again, the selected value is confirmed and stored. The display changes to the
following screen. The point search mode can now be altered with the “+” and “-” keys (2).
60.0J
CW
The setting options for the point search mode are “0” (point search off), “M” (manual point search) and “A”
(automatic point search). (See the chapter “Point Search”. By pressing the SET key (3), the selected value is
confirmed and stored.
The information on the screen changes into the following display.
60.0J
CW
The therapy program can be changed with the “+” and “-” (2) keys and saved with the SET key.
The setting options are:
CW – Multifrequency – Alpha frequency – Nogier frequencies A–G – Bahr frequencies 1–7 – Reininger
frequencies 1-12, – Nogier frequencies pot. A’–G’ – freely programmable frequencies between 1 and 9999 Hz
For therapy programs and frequencies, see Appendix 1.
200mW
A
200mW
M
200mW
M
200mW
M
8 Last revised 2017-11-08