360_VisionDome_Int_&_Ext_Inst_manual_V2.03_2006-03-14.doc Page 14 of 25
VisionDome Installation Manual
©360 Vision Technology Ltd Version 2.03
Step 1 – Cut hole and fit support plate.
Cut a hole in the false ceiling tile ensuring adequate weight considerations of the VisionDome
and support plate. Attach the supplied Lanyard in order to secure the unit.
Fixing to a false ceiling tile
Use the description for ‘wall and ceiling mounting’ for details of connections, attaching acrylic
and powering up.
THE HOLES IN THE
SUPPORT PLATE
CAN BE SECURED
TO THE BUILDING
STRUCTURE
USING 2mm DIA
BINDING WIRE
TWIST OFF TOP PART TO
GAIN ACCESS TO
CONNECTIONS
USE CABLE TIE TO SECURE
CABLES TO THE HORIZONTAL BAR
AT THE TOP OF THE TOP PIECE
THE SUPPORT PLATE CAN
BE FITTED ABOVE THE
CEILING TILE OR IN
PLACE OF A 300mm X
600mm CEILING TILE
LANYARD IS SCREWED
TO THE HOLE IN TOP OF
DOME. SCREW FREE END
TO PART OF THE
STRUCTURE OF THE
BUILDING
CLAMP SWINGS OUT TO
SUPPORT DOME AS THE
SCREW IS TIGHTENED
(CLOCK-WISE)
WHEN SCREW IS LOOSENED
(ANTI-CLOCKWISE) THE CLAMP
SWINGS INWARDS TO ALLOW
THE CYLINDRICAL DOME BODY
TO PASS THROUGH THE HOLE IN
THE CEILING
