360_VisionDome_Int_&_Ext_Inst_manual_V2.03_2006-03-14.doc Page 10 of 25
VisionDome Installation Manual
©360 Vision Technology Ltd Version 2.03
CLIP LANYARD ONTO DOME BODY
LOCKING
SCREW
214
mm
204 mm dia
TWIST BODY OF
VisionDome ONTO DOME
BASE OR WALL BRACKET
SECURE USING LOCKING
SCREW
TWIST ACRYLIC ONTO
DOME BODY
DOME BASE OR
WALL BRACKET
DOME BODY
ACRYLIC
Step 2 - Make connections
The internal dome connection board is located at the top of the dome and can be seen when
the dome is removed from the internal wall bracket or internal ceiling mount.
VisionDome (Internal) CONNECTION BOARD
Step 3 – Fit dome body
Align the security screw mount to the security screw socket on either the wall or ceiling mount
bracket – there is only one way to align and fix the top section. Once aligned, push up and
twist clockwise to ensure the 3 fixing lugs are correctly located as in Fig 4.
Data Connections:
If using RS485 twisted pair then connect to D+
and D-. (SCN is an unconnected terminal that
can be used to terminate the screen if required.)
Power Connections:
Connect 24Vac to 24VAC terminals
Video Connections:
For structured cable domes use VD+ and VD-
For COAX cable domes use:
Connect coax centre core to COAX VID
Connect the screen to COAX SCN
