RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page 7
5.
Press ENTER. The selected Cut or Stack is now assigned
to the key.
Note:
It is not necessary to Clear a PRESET before reassigning it.
6.
With the SCROLL LOCK function ON, press the key you
selected to play the PRESET.
ASSIGNING PRESETS IN GROUPS
You can assign Cuts or Stacks within a single Directory in sequential order
all at once.
•
The assignment order is determined by the current SORT
BY selection under the SETUP MENU. If SORT BY is set to
INDEX, the PRESETs will be assigned in Index order,
beginning with the currently selected Cut or Stack. If SORT
BY is set to NAME, the PRESETs will be assigned in
alphabetical order, beginning with the currently selected Cut
or Stack.
•
All available PRESETs will be assigned in order, with no
breaks or skips for missing Index numbers. That is, you
don't have to use a Directory with the first 104 Index
numbers in use. DigiCart will ignore any unfilled Index
locations and assign all Cuts in order for as many Presets as
your system has available.
•
Group assignments start with the currently selected Cut or
Stack. For example, if you are cued up to Cut Index 100
(and SORT BY is set to INDEX), the PRESET assignments
will start with Index 100 assigned to PRESET A-1. The next
available Cut (probably Index 101) will be assigned to
PRESET B-2, and so on.
Follow these steps to assign groups of Presets:
1.
Use the SELECT and POSITION Arrows or FIND operations
to locate the
first
Cut or Linear Stack you wish to assign.
2.
Press the Left POSITION ARROW to go to the Directory
Layer.
3.
Press UTILITY MENU (F1) and select ASSIGN PRESET.
