58
•
Audio Editing
Setting FADE OUT to a Specific Value
This method allows setting the Fade Out length to a known value. This is accomplished without
playing the audio.
•
Select a cut and press
EDIT
. Select FADE OUT by using selection knob. Press
ENTER
. The
current Fade Out duration will be indicated on the display.
•
Use the
selection knob
and
navigation arrows
to adjust the Fade Out duration.
•
Press
PLAY
to audition the new Fade Out starting at the Pre-Roll distance before the Fade Out
point. Repeat the previous steps as needed to adjust the FADE OUT duration.
•
Press
ENTER
to save the new Fade Out duration, or
EXIT
to close the cut with no change.
Setting FADE OUT using Auto-Set
The Auto-Set feature allows setting a new Fade Out time during audition. In Edit mode, use the
PLAY
button to start playback and the
STOP
button to set the Fade Out duration and stop playback.
•
Select a cut and press EDIT. Select Fade Out by using the selection knob. Press
PLAY
and
the cut will begin playing from the Head point. You will not hear the fade at this time. Press
STOP
to set the new FADE Out time.
•
Fades are limited to 40 seconds in length. If
STOP
was pressed at a point in the file earlier
than 40 seconds from the Tail point, the FADE OUT value will be set to 40 seconds.
•
After pressing
STOP
, the display will show any previous Fade Out time on the top line and
the newly selected Fade Out on the bottom line. You may use the
selection knob
and
navigation arrows
to adjust the FADE OUT value.
•
Press
PLAY
to audition the new Fade Out. Playback will begin before the edit according to
the current Pre-Roll setting. Repeat the previous steps as needed to adjust the Fade Out end-
point position.
•
Press
ENTER
to save the new Fade Out time, or
EXIT
to close the cut with no change.
O
UTPUT
G
AIN
Allows the adjustment of the Output Gain (level) of a cut
after
it has been recorded. Gain may be
adjusted over a range of +6 dB to -90 dB, referenced to the initially recorded level. Output Gain is
the only Edit Menu function that is not time based. Output Gain may be adjusted for decibels or
tenths of a decibel.
Just as with all other Edit Menu functions, this function is non-destructive and the gain setting is
stored as part of a cut's header. DigiCart/EX automatically play the file with the adjusted gain setting.
•
Select a cut and press
EDIT
. Select OUTPUT GAIN using the selection knob. Press
ENTER
or
STOP
. The display will show the current gain setting for the cut, relative to the originally
recorded level.
•
Use the navigation arrows
to select the value for decibels (<1.0>) or tenths of decibels
(<0.1>). Use the
selection knob
to adjust the Output Gain.
•
Press the
ENTER
button to save changes or
EXIT
to abandon changes.
Output Gain is not applicable to cuts in the Digital Data format.
Содержание DigiCart ex E-3000
Страница 1: ...Owner s Manual ...
Страница 2: ... Inside front cover intentionally blank ...
