manualshive.com logo in svg

3 Day Blinds 2, Начало работы

Поделиться
Скачать
3 Day Blinds 2 Скачать руководство пользователя страница 8

|  2   &   2 

1

/

2

" Wood & Faux Wood & Angled Slat Blinds

8

 Part # PM-048 © 2018 3 Day Blinds Corporation 02/18

800-800-3329 | 3dayblinds.com

Inner cords can pull out to form a loop, which can strangle a 

young child.

• Inner cord stop devices can reduce this risk if positioned 

correctly on the pull cords.
• If inner cord stop devices are more than 3 in (76 mm) below 

the headrail when the blind is fully lowered, move them closer by 

loosening, but not untying, the knot surrounding the cord stop 

and sliding the cord stop upwards. Repeat for any remaining 

cords

         WARNING

Young children can STRANGLE in cord and bead chain loops. 

They can also wrap cords around their necks and STRANGLE.

Young children can STRANGLE in cord and bead chain loops and 

in the loop(s) above the cord connector. They can also wrap 

cords around their necks and STRANGLE.

• Always keep cords and bead chains out of children’s reach.
•  Move cribs, playpens, and other furniture away from cords 

and bead chains. Children can climb furniture to get to cords.

•  Do not tie cords together. Make sure cords do not twist 

together and create a loop.

ANSI/WCMA A100.1-2014 5.2.3

• Always keep cords and bead chains out of children’s reach.
•  Move cribs, playpens, and other furniture away from cords and 

bead chains. Children can climb furniture to get to cords.

ANSI/WCMA A100.1-2014 5.2.3

Содержание 2









Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды