2Wire HomePortal 3801HGV, Руководство пользователя

Страница: 69 / 128

Configuring Advance Wireless Settings 61
HomePortal 3801HGV Gateway User Guide Configuring LAN Devices
Configuring Advance Wireless Settings
Objective
To configure advance wireless settings.
This allows you to further optimize wireless settings for better performance.
Note
It is recommended that you leave the default settings as is; however, if you are
experiencing connection or performance difficulties, altering these settings may improve
performance.
Steps
1.
Navigate to Settings > LAN > Wireless . The Wireless page to configure the Advanced
Settings appears.
2.
Select the power level for your wireless connection from the Power Setting drop-down list.
The configured power level is the actual transmitted radio power at the access point. The
default list is from
1 to 4 . Following table provides the output power levels for 802.11b and
802.11g types of wireless modes:
3.
Select the Wireless Mode from the drop-down list. This allows you to force the gateway to
use 802.11b/g , 802.11b -only, or 802.11g -only modes of operation. Check the wireless
mode supported by the wireless adapter before configuring this option.
4.
Enter the DTIM Period (seconds) in the text box. This Delivery Traffic Indication Message
(DTIM) value determines the interval at which the access point sends its broadcast traffic.
5.
Select the Maximum Connection Rate from the drop-down list. This is the maximum rate
at which your wireless connection works. Select 1 , 2 , 5.5 , 11 , or 22 Mbps for 802.11b-
based models and 1 , 2 , 5.5 , 11 , 6 , 9 , 12 , 24 , 36 , 48 , or 54 Mbps for 802.11b/g-based
models.
Power Settings Radio Output Power
802.11b (mW) 802.11g (mW)
1 (maximum) 50 30
2 25 15
3 12 8
4 6 4