2VV.
Creating innovative solutions for you and your business since 1995.
10.
CLEANING AND MAINTENANCE
10.1 CLEANING
ATTENTION!
The main electrical supply must be switched off before accessing the inside of the air curtain. The air curtain
must be allowed to cool down!
When cleaning the unit do not use compressed air, aggressive chemicals, solvents or water.
Clean with a damp cloth, a soft cloth, or a vacuum cleaner.
Clean the surface of the air curtain, including the suction part.
Perform cleaning as needed, recommended at least every 3 months.
Observe safety and use protective equipment.
11. SERVIS
11.1 WHEN YOU AREN‘T ABLE TO REMOVE DEFECT BY YOURSELF
If you are unable to resolve the problem, contact the supplier.
For the fast removal of defects please provide the following information:
- product reference number
- serial number
- running time
- connected accessories
- installation location
- installation condition (including electrical)
- detailed description of the problem and the steps that you have taken for its removal
Warranty and post-warranty service is performed by the manufacturer, supplier or authorized service organi
-
zation. When contacting service assistance it is necessary to describe the defect, product type designation
indicated on its label, and the location of installation.
11.2 PUTTING THE PRODUCT OUT OF OPERATION - DISPOSAL
Before disposing of the product, make the product unusable. Even old products contain raw materials that can be reused.
Take them to a collection point of secondary raw materials.
The product is good to dispose at the place, which is specialized for it, and thus it will be possible to recycle materials. Store
unusable parts of the product at a controlled dump.
When disposing of materials, it is necessary to observe the relevant national regulations on waste disposal.
Содержание STANDESSE XP VCST5D150-V3 Series
Страница 1: ...INSTALLATION EN STANDESSE XP ...
Страница 27: ...AirGENIO superior control EN STANDESSE XP ...