2VV ESSENSSE NEO VCES2-B...E3 Series, Руководство по установке

Страница: 23 / 31

23
8. CLEANING AND MAINTENANCE
8.1 CLEANING
ATTENTION!
Before carrying out any work inside the air curtain, the main power input must be disconnected. The air curtain must be
allowed to cool down!
•
It is forbidden to use compressed air, aggressive chemicals, solvents or water for cleaning.
•
Clean using a damp cloth, fine brush or vacuum cleaner.
•
Clean the surface of the air curtain including the suction inlet part.
•
Clean as necessary, it is recommended that cleaning should be performed at least once every 3 months.
•
Adhere to workplace safety and use protective aids.
9. SERVIS
9.1 WHEN YOU AREN‘T ABLE TO REMOVE DEFECT BY YOURSELF
If you are unable to resolve the problem, contact the supplier.
For the fast removal of defects please provide the following information:
- product reference number
- serial number
- running time
- used accessories
- installation location
- installation condition (including electrical)
- detailed description of the problem and the steps that you have taken for its removal
Warranty and post-warranty service is performed by the manufacturer, supplier or authorized service organizati-
on. When ordering service intervention it is necessary to describe the defect, product type designation indicated
on its label, and the location of installation.
9.2 PUTTING THE PRODUCT OUT OF OPERATION - DISPOSAL
Before disposing of the product, make the product unusable. Even old products contain raw materials that can be reused. Take
them to a collection point of secondary raw materials.
The product is good to dispose at the place, which is specialized for it, and thus it will be possible to recycle materials. Store unusa-
ble parts of the product at a controlled dump.
When disposing of materials, it is necessary to observe the relevant national regulations on waste disposal.