2N OpenStage 10T Скачать руководство пользователя страница 34

Страница: 34 / 59

Basic Functions

4.1

switches into the HandsFree mode too. This is signalled by the button LED. Now you

can hang up the handset without terminating the call.

Call Slot

Use the function to make multiple calls from one terminal by holding the previous call

and setting up a new call using another call slot. By default, each terminal has three

call slots.

Use:

Push the unused ("switched-off") call slot button during a call. The active call will be

put on hold as with the Flash function, you will hear the dialtone and the held user will

hear pre-defined music. If there are more calls in your terminal call slots, you can

switch them using the respective call slot buttons. The active call slot LED is shining

while the held call slot LED is flashing. The unused call slot LED is off.

Intercom

Intercom is a special type of call where a predefined telephone number is dialled by

pressing the Intercom function button and the called station receives the call

automatically in the HandsFree mode. The function is suitable for flexible

communication – you can speak the moment you push the button.

The Intercom function works with the

2N® StarPoint 500

telephones only; if a

different telephone type is used, the call is not answered automatically.

Use:

Press and keep pressed the button with the Intercom function. Start speaking when

you hear a beep. The called user answers the call automatically in the HandsFree

mode. The called party gets an acoustic signal before the call. Keep the button

pressed during the whole call. Release the button to terminate the connection.

Mute

Use the function to temporarily mute the microphone during a call.

Use:

Push the function button during a call. The opponent cannot hear you. The muted

state is signalled by a flashing button LED indicator. Re-push the button to re-activate

the microphone.

Call Recording

Use the function to enable call recording. This function is based on the PBX

administrators's permission to record.

Содержание OpenStage 10T




























































Результаты поиска

Содержание OpenStage 10T

Отзывы:

Похожие инструкции для OpenStage 10T

Бренды по названию

Популярные бренды

2N OpenStage 10T, Руководство пользователя

Результаты поиска

Содержание OpenStage 10T

Отзывы:

Похожие инструкции для OpenStage 10T

Бренды по названию

Популярные бренды