manualshive.com logo in svg

2N IP Style 9157101, Руководство по установке

Поделиться
Скачать
2N IP Style 9157101 Скачать руководство пользователя страница 69

Installation Manual 2N® IP Style

69

 /  

88

•
•
•
•

If the address is 0.0.0.0, then the device did not get the IP address from the DHCP server and the 
static IP address (DHCP OFF) has to be used. If DHCP OFF is set, the device static address is 
192.168.1.100.

Device Restart

To restart the device, disconnect the device from the power supply or use the web interface in 
the System / Maintenance section. No configuration change appears after the restart.

Factory Default Reset

Located among the main unit connectors, the CONTROL button helps you reset the factory 
default values.

Follow the instructions below to reset the factory default values:

Disconnect the device from the power supply.
Press and hold the CONTROL button.
Connect the device to the power supply.
Keep holding the button for a few seconds and then release it.

•

Caution

Do not touch the display during restart, it is being calibrated.

Содержание IP Style 9157101

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды