2N IP Force 9151101CHKW Скачать руководство пользователя | Manualshive

Страница: 115 / 118

background image

Installation manual 2N® IP Force

115

/

118

5.3 General Instructions and Cautions

Please read this User Manual carefully before using the product. Follow all
instructions and recommendations included herein.

Any use of the product that is in contradiction with the instructions provided
herein may result in malfunction, damage or destruction of the product.

The manufacturer shall not be liable and responsible for any damage
incurred as a result of a use of the product other than that included herein,
namely undue application and disobedience of the recommendations and
warnings in contradiction herewith.

Any use or connection of the product other than those included herein shall
be considered undue and the manufacturer shall not be liable for any
consequences arisen as a result of such misconduct.

Moreover, the manufacturer shall not be liable for any damage or destruction
of the product incurred as a result of misplacement, incompetent installation
and/or undue operation and use of the product in contradiction herewith.

The manufacturer assumes no responsibility for any malfunction, damage or
destruction of the product caused by incompetent replacement of parts or
due to the use of reproduction parts or components.

The manufacturer shall not be liable and responsible for any loss or damage
incurred as a result of a natural disaster or any other unfavourable natural
condition.

as a result thereof. Using a product / device version other than the
latest one or a version determined by the manufacturer as
incompatible with certain versions of other products, or using the

product / device in contradiction to the manufacturer’s instructions,

guidelines or recommendations or in conjunction with unsuitable
products / devices of other suppliers, the customer agrees that the 2N
TELEKOMUNIKACE a.s. company shall not be held liable for any
functionality limitation of such a product or any damage, loss or injury
related to this potential functionality limitation.

«
...
113
114
115
116
117
...
»

Содержание IP Force 9151101CHKW























































































































Отзывы:

Нет отзывов

Похожие инструкции для IP Force 9151101CHKW

Бренд: Zenith Страницы: 24

Бренд: Laskomex Страницы: 36

Бренд: Zamel Страницы: 12

Бренд: Zamel Страницы: 12

Бренд: PSB Страницы: 2

Бренд: M-system Страницы: 9

Бренд: Insignia Страницы: 22

Бренд: IMG STAGELINE Страницы: 6

Ezi-IO EtherCAT DA

Бренд: Fastech Страницы: 52

Бренд: Peavey Страницы: 4

Foxtrot C-IT-0908S

Бренд: TECO Страницы: 4

Бренд: Bticino Страницы: 25

Бренд: RoDEK Страницы: 16

Бренд: EDIFIER Страницы: 8

970114-0403 - X 530 5.1-CH PC Multimedia Home Theater Speaker Sys

Бренд: Logitech Страницы: 10

ETR 2000 series

Бренд: Delco Страницы: 34

Бренд: Daewoo Страницы: 22

Бренд: Autopot Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды