2N® Indoor View User Manual
16
/
132
Cut a circular hole in the wall of the diameter of 103 mm and depth of 50 mm before installation.
It is assumed that all necessary cables of the maximum length of 25 cm will lead to the hole. Put
the flush mounting box in the hole to make sure that the hole is deep enough. If the hole
complies with the box size, wall in the box and level the box using a water level on the holding
•
Caution
Before starting the mechanical installation on a selected place, make sure
carefully that the preparations connected with it (drilling, wall cutting) cannot
damage the electrical, gas, water and other existing wires and pipes.
