2N BRI Lite, Руководство пользователя

Страница: 89 / 152

2N TELEKOMUNIKACE a.s., www.2n.cz 89/152
Reject call – reject call for the selected CLIP.
Ignore call – ignore call for the selected CLIP.
Tone dial-in – incoming GSM calls is accepted + dialtone is activated for
the selected CLIP.
DISA message dial-in – incoming GSM calls is ac voice message is
activated for the selected CLIP.
Dial to VoIP/ISDN – VoIP destination number for the CLIP routing function.
Auto CallBack – enable/disable the CallBack function for the selected CLIP
according to the Gateway configuration / GSM basic settings / Calls / Source
setting. interface for CallBack
– set the maximum call duration (minutes). Call duration limit
Tip
CallBack detects the CLIP from right to left. Thus, configure 10 rules for
all the incoming CLIPs to make CallBack work properly. Each of the rules
must contain one of the CLIPs: 0,1,2,3,4,5,6,7,8,9.
Note
Remember to activate the CallBack mode in the GSM incoming groups
for a proper function.
The maximum count of CLIP routing table records is 96.
Mobility Extension
Use this table to register the Mobility Extension users.
Name – user name for calling to VoIP.
User – registration user name for VoIP.
Password – registration user password for VoIP.
GSM number (CLIP) – user SIM card CLIP.
Follow me function – enable/disable call forwarding to the user mobile station
(according to CLIP).
SMS at no answer function – enable/disable sending of SMS on missed calls.
Ethernet Configuration
Use this window to set the gateway Ethernet interface.
Use DHCP – enable/disable the DHCP client function for gateway. 2N BRI
®