2N 914422E, Руководство по установке

Страница: 30 / 44

2N TELEKOMUNIKACE a.s., www.2n.cz 30/44
Note
The delay after pressing RESET till the first light and sound signalling is
set to 15–35 s depending on the 2N IP intercom/answering unit model
used.
11 s is the valid value for . 2N SIP Speaker Horn
®
Static IP Address Setting
Follow the instructions below to switch on the mode (DHCP OFF): Static IP address
Press and hold the RESET button.
Wait until the red and green LEDs go on simultaneously on the device and the
acoustic signal can be heard (approx. 15–35 s).
Wait until the red LED goes off and the acoustic signal can be heard
(approx. for another 3 s).
Release the RESET button.
The following network parameters will be set after restart:
IP address: 192.168.1.100
Network mask: 255.255.255.0
Default gateway: 192.168.1.1
Dynamic IP Address Setting
Follow the instructions below to switch on the mode (DCHP ON): Dynamic IP address
Press and hold the RESET button.
Wait until the red and green LEDs go on simultaneously on the device and the