© 2mag AG
Page 12 of 17
Version: 5.1
Example:
Two dots are lighting
stirring position 2 is addressed and can be control
by MINUS- (11) resp. the PLUS-key (12) as well as the ON/OFF-key (8).
Each stirring position can be set the stirring speed from 100-2000 rpm in
steps by 10 and ON/OFF individually and separately.
Status ON – stirring positions
If the indication dots are lighting with a figure in the range 100-2000 rpm
the addressed stirrer is switched on and working with the displayed speed.
If the indication dots are lighting without any figure the addressed stirrer
is switched off.
Display, Magnetic Stirrer
The display (10) provides as described above a description of:
Current stirring speed (always with switched on magnetic stirrer)
Indication with help of the indication points which stirring position is
addressed.
To check, whether the magnetic stirrer is switched on. The display
will not be illuminated in case the stirrer is switched off.
Furthermore following status can be shown:
„
.
“
1 indication dot is lighting -
stirring position 1
can be controlled
by keys
„
..
“ 2 indication dots are lighting -
stirring position 2
can be controlled
by keys
„
…
“ 3 indication dots are lighting -
stirring position 3
can be controlled
by keys
„
….
“ 4 indication dots are lighting: -
stirring position 4
can be
controlled by keys
„
_
“ (under score) of first segment is lighting:
synchronous operation
–
all stirring positions 1-4
can be controlled at one time by keys.
The wear-free inductive drive works with magnetism.
Cardiac pacemakers, data storage mediums,
magnetic cards and other devices,
which can be
affected by magnetic fields, have to be kept away from
the fields of the stirring unit as well as from the stirring
bars.
