2M Technology |
Turnstile Controller User Manual
3
www.2MTechnology.net
2. Factory Set
1.
Master-slave:
Choose between slave or master mode. This setting should be kept in Master Mode.
2.
Set Zero:
setting the arm closing position
3.
The rest of the settings in this section is only for factory use
3. Output Set
1.
Pass out
– After people pass through the passageway, then it will trigger the output
2.
Alarm out
– disable or enable alarm signal output
3.
Buzzer out
– disable or enable buzzer signal output
4.
Alarm audio
– disable or enable an audio signal output