Printed in U.S.A.
8-06
©
Copyright 2006 TAC All Rights Reserved.
F-26277-7
TAC
1354 Clifford Avenue
P. O. Box 2940
Loves Park, IL 61132-2940
www.tac.com
Application
TAC I/A Series MicroNet Sensors are wall-mounted
digital temperature and humidity sensors for use with
TAC I/A Series MicroNet Controllers. These sensors
feature Sensor Link (S-Link) communication protocol
that provides a simple two wire interface for power and
exchange of sensor and subbase information.
Available in twelve models, these TAC I/A Series
MicroNet Sensors provide integral analog to digital
conversion for elimination of electrical interference
between sensor and controller. An optional wiring
connection allows access to the TAC MicroNet
L
ON
W
ORKS
®
network (LON
®
) via a L
ON
W
ORKS
network
jack on the left side of each sensor. This jack allows
direct connection to a PC running WorkPlace Tech Tool
(WP Tech) or a third party Network Management Tool.
Each sensor also provides an S-Link jack on the right
side for connecting to a PDA running Pocket TAC I/A
software.
TAC I/A Series MicroNet Sensors are suitable for
direct-wall, 2 x 4 electrical box, 1/4 DIN electrical box,
or surface box mounting.
Model Chart
See Table-1 on page 2 for a chart of the models.
MN-Sx, MN-SxHT,
MN-S4-FCS,
and MN-S4HT-FCS
TAC I/A Series
®
MicroNet
™
Sensors
General Instructions
MN-S1
MN-S1HT
MN-S3
MN-S3HT
MN-S4-FCS
MN-S4HT-FCS
MN-S4
MN-S4HT
MN-S2
MN-S2HT
MN-S5
MN-S5HT
