Programmable Plug in Thermostat TC-300
Day, Time and PRG. Setting.
Dimension
The thermostat provides the option to program 23 time settings, irrespective of the day, i.e. a total of 161 switching
programmes per week. These are shown in the display with a series of figures at the up and bottom of the display.
You have already set the temperature value before: (see page 2, mode temperature pre-set) .
The comfort function is displayed as a
symbol (e.g. 25.5°C).
The energy-saving function is displayed as a symbol (e.g. 20.5°C)
To set the time ,day and program with the below following steps.
-
Press and hold the “P” button for around 3 seconds. The minutes flashes in the display (A).
-
Change this value using the “+” and “–“ buttons.
-
Press the “P” button . The hours flashes in the display (B).
-
Change this value using the “+” and “–“ buttons.
-
Press the “P” button. The day flashes as a number in the display (C).
-
Change this value using the “+” and “–“ buttons. Use 1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for
Thursday, 5 for Friday, 6 for Saturday and 7 for Sunday.
-
Press the “P” button . The switch program (D) and mode icon (F) flashes.
-
Setup the program using the “+” and “–“ buttons. Use “M” button to change the mode. Comfort Mode(
) and
energy-saving mode ( ).
-
Press the “P” button after made the desired setting for this day, it will automatically skip to next day, you have the
option of skipping to other days by pressing “P” button.
-
To leave this menu, just wait 10 seconds or just push on the on/off button. The setup will be memorized by the
EEPROM (when this feature is enabled).
A
B
C
D
E
F
