Additional Information
Basic Commands
»
Basic Get commands to the EDGE panel will receive a response of Basic Report Value 0
»
Basic Set commands to the EDGE panel are ignored
Group Identifier
»
Only Group 1 is supported
»
Max number of devices per group: 1
Associations
»
Associations can be set by controllers with the ASSOCIATION_SET command
»
Associations supported commands:
»
COMMAND_CLASS_DEVICE_RESET_LOCALLY
»
DEVICE_RESET_LOCALLY_NOTIFICATION
NOTE:
Associations are not controlled/supported through the
EDGE
UI .
S2
»
Supported Command Classes and Security Levels
NOTE:
EDGE
minimum required security level is none .
Command Class
Version
Number
COMMAND_CLASS_ZWAVEPLUS_INFO
2
COMMAND_CLASS_MANUFACTURER_SPECIFIC
1
COMMAND_CLASS_SECURITY
1
COMMAND_CLASS_SECURITY_2
1
COMMAND_CLASS_INCLUSION_CONTROLLER
1
COMMAND_CLASS_TRANSPORT_SERVICE_V2
2
COMMAND_CLASS_DEVICE_RESET_LOCALLY
1
COMMAND_CLASS_POWERLEVEL
1
COMMAND_CLASS_CRC_16_ENCAP
1
COMMAND_CLASS_ASSOCIATION_V2
2
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3
3
COMMAND_CLASS_SUPERVISION
1
Controller Replication
Controller replication is not supported through the panel User Interface. Please consult your backend provider if the
replication option is available through the dealer portal.
Содержание EDGE
Страница 1: ...TM 2GIG EDGE TM Security Smart Home System SMART HOME MANUAL...
Страница 32: ...2GIG EDGE Smart Home Manual 32...