-7-
4. Terminal Description For Outdoor Station
1 2 3
Lock Control Jumper
PIR Motion Detector
Connect Port
+12V GND
PIR
L1 L2 PL
S+ S-
Main Connect Port
Lock Control Jumper:
To select the lock type.
Motion Detector Connect Port:
To connect
external PIR motion detector.
Main Connect Port:
To connect the bus line
and the electronic locks.
•
L1,L2:
Connect to the bus line, no polarity.
•
PL:
External lock power input, connect to the
power positive(power +).
•
S+:
Lock power(+) output.
•
S-:
Lock power(-) output, connect to the power(-) input of locks(only when using the door
station to power the locks, if using the external power supply for the locks, the S- will not
be connected).
5.
Functions Setting Up
Of Outdoor Station
KEY_1
KEY_2
KEY_3
KEY_4
KEY_SET
LED_UNLOCK
LED_TALK
LED_NAME
RF CARD
This section explains the settings of each
function,please refer to the following table:
To perform the settings for the function you
want,you should move away the metal front
panel. Please refer to the sketch map.
Each operation is indicated by the lighting up
of the
LED
indicator on the unit, and by the
sounding of the buzzer.
Note: Must be less than 200mA, please always use DS-ERL with all outdoor station. See
page 14 for instruction.
Содержание DK1711
Страница 2: ......
Страница 19: ... 17 14 Hooking Up a Door Release ...
