The 1&1 HomeServer will now be reset. This may take
a few minutes. Your 1&1 HomeServer automatically
restarts and must then be set up again using the
1&1 Start-Code.
Completing the
factory settings
Do not under any circum-
stances unplug the device
from the power socket - it
can damage the firmware.
The 1&1 HomeServer is
ready for use as soon as
the Power / DSL LED is
permanently illuminated.
Step 4
Click on
OK
4
.
4
Step 5
Confirm your selection. To do this, enter
the code sent to your telephone or press a
button on your 1&1 DSL router.
Step 6
Click on
OK
to confirm that you wish to
restore the factory settings.
24