7
8
Use
Measurement Consideration
CAUTION
1. Make sure the measuring site is dry, clean prior to measurement
taking.
2. Clean the probe before and after each measurement to prevent
cross-contamination, see
Cleaning & Disinfection
.
3. After cleaning and disinfection the probe, please wait for at least
2 minutes to do a measurement.
1. Straighten the ear canal.
For Children under 12 months: Make
the ear canal straight by gently pulling
the ear backward.
For Children over 12 months and
Adults: Make the ear canal straight by
gently pulling the ear backward and
upward.
2. Place the probe inside the ear canal.
3. Press and release power button to do
a measurement.
Doing A Measurement
1. Press and release the power button to turn on the device; it will
auto self-diagnosis.
2. After completing self-diagnosis, the device
will be ready for measurement.
3. Press and release the power button then read
the temperature.
Use
4. The backlight will light up in accordance with the temperature,
shown as below table.
Temperature (T)
Backlight
T ≤ 98.9
Green Backlight
99 ≤ T ≤ 99.4
Yellow Backlight
99.5 ≤ T
Red Backlight
Cleaning & Disinfection
1. To clean and disinfect the device, use a cotton swab or pad
moistened with 70% alcohol to wipe the Sensor and Probe.
2. Use a cloth dampened with water or neutral detergent to clean
and dry the device.
3. Do not use thinner, benzene, and other harsh cleaners for cleaning
the device.
4. Do not immerse the unit in water or liquid of any kind.
The unit is
not water proof.
Do not submerge or expose the device to water.
Do not use corrosive detergent to clean the device. Clean and
disinfect the thermometer before and after use.
Cleaning process:
1. Pre-cleaning with cold water wash several times.
2. Clean the probe with a solution of 5-10% mild detergent about 10-
15 seconds.
3. Continuously clean with cold water to avoid
any chemical residues
remaining on the device.
4. Rinse the device with drinking water or distilled water to ensure the
removal of all remnants of the cleaning agent.
5. If necessary, repeat step
2 through step
4 in order to make sure the
device is clean.
