
Make sure the speaker is in AUX-in mode when using this feature.
Short press: play/pause/mute music
5.
Intelligent energy saving function
The speaker automatically turns off in the following cases:
1.
In bluetooth mode: it takes more than 20 minutes to pair the speaker
2.
In bluetooth mode: the speaker does not play music for more than 20 minutes
3.
In any mode: when the speaker is paused/muted for more than 20 minutes
Please note:
long press the
button to turn the speaker back on
6.
FM radio mode
Turn on the speaker and briefly press the
button to switch to FM radio mode. The speaker will prompt:
"FM radio mode."
6.1
Switching between radio stations
Short press: automatically search for the next radio station
Short press: automatically search for the previous radio station
7.
Charging
When the speaker's battery is low, the device will prompt: "low battery". Charge the battery immediately via a
USB adapter. The charging indicator turns on when the battery is fully charged.
If the battery voltage is lower than 3.4V +/-0.05V, the speaker will automatically turn off in any mode.
Note:
Use an adapter (5V 1A) to fully charge the battery in 4 hours.
8.
Colorful ambient lighting
Press twice: turn ambient lighting on/off (only in USB/AUX-in/FM radio mode). Every three seconds the color
changes (a total of 8 colors).
Troubleshooting
1.
What should I do if the speaker cannot pair with a bluetooth device and play music?
-
Check the specifications/manual of your Bluetooth device (your cell phone or computer). Check if the
device supports A2DP stereo audio transmission. If yes, enable A2DP stereo mode.
-
Activate bluetooth mode. If there are multiple devices around you, it may be difficult for the speaker to
find the correct device. In this case, disable other devices.
2.
What should I do if the USB flash drive does not work?
-
Make sure that the USB flash drive is in good condition. Also make sure that the audio files have the
correct formats: MP3/WMA/WAV/APE/FLAC.
-
In addition, your USB flash drive may also be incompatible. We recommend formatting the stick to the
FAT32 file format.
3.
What should I do if the speaker crashes and all the buttons don't work?
-
The speaker's internal system may be malfunctioning. Press the
button for 10 seconds to reset the
speaker's software.