After pairing, the blue bluetooth/TWS light turns on for the left channel (master speaker). The red
bluetooth/TWS light turns on for the right channel (slave speaker).
When the devices are connected to TWS, the speaker will prompt: "TWS paired".
Enable the bluetooth function of your mobile/other devices and connect to the 123ink G100 speaker.
When connected, the speaker will prompt: "device paired". The blue bluetooth/TWS indicator turns on.
The two speakers can now play music simultaneously.
Disconnect the two paired speakers by pressing the button on one of the two G100
’s twice. The
speaker will prompt, "TWS disconnected."
The speaker will prompt, "TWS removed" when you long press the button on one of the speakers
Please note:
1. To use this feature, you need two 123inkt G100 bluetooth speakers.
2. The bluetooth/TWS indicators flash blue before pairing with TWS. This happens when both
speakers have not been previously connected to a Bluetooth device.
3. If the two speakers were previously paired with a third G100 speaker, you must clear the pairing
memory first. Otherwise, the speakers cannot pair with each other. Long press the
button on
both speakers to clear the TWS pairing memory.
3.
Playing music from a USB stick
Insert the USB flash drive into the speaker. Briefly press the button to enter USB mode. The speaker will
immediately play the music from the USB stick. The speaker will prompt: "PC USB mode".
3.1
Ambient light
Press twice: turn ambient light on/off
3.2
Switch to another folder on the USB drive
Press twice: switch to the next folder on the USB drive
Press twice: switch back to the previous folder on the USB drive
3.3
Switch songs
Short press: switch to the next song
Short press: switch back to the previous song
4.
AUX-in mode
Use the included 3.5mm audio cable to connect the speaker to an audio source such as a PC, cell phone,
MP3/MP4.
Short press: Activate AUX-in mode. The speaker will prompt: "AUX-in mode." The speaker then plays the
music from the audio source.
Please note:
When you connect the speaker to your PC via the AUX-in cable to play music, you can charge the speaker
at the same time. If your computer's power supply is weak, we recommend using an adapter (5V 2A) instead
of your computer's USB port for playing music and simultaneously charging the speaker.