123electric Smart BMS gen 3, Руководство пользователя

Страница: 22 / 26

22
123electric
The Netherlands
E-mail: info@123electric.eu
www.123electric.eu
End Board
To b Mount hole for the 'plus'-pole of the cell.
To battery - Solder a wire on the solder pad and connect this wire to the minus (-)
side of the cell.
Info LED Indicator LED. Flashes when BMS data is received. Continuous ON
when the balance mode is active.
Load status LED Flashes when load relay is active (every 5 seconds)
Charge status LED Flashes when charge relay is active (every 5 seconds)
BMS IN Interconnection connector for the data link to the previous cell
board.
Button Button for Bluetooth configuration and password reset.
Charge relay contacts Relay for cutting off chargers, MPPT, solar chargers etc. In case of full
batteries.
Load relay contacts Relay for cutting off consumers like inverters, etc. In case of empty
batteries.
Extended data output Data output for external modules.