9
B. With 4 TA5*40mm screws, tighten the back panel on the wall a
ccording to
diagram (6).
C. Connect the cables of RJ45, power, and electric-lock to the motherboard socket as mentioned
in connectors description (refer to Section 2).
D. Test whether there is electricity by doing the following:
Press the # button for 3 seconds to get the IP address of intercom by voice.
Input access password or press the indoor switch to check electric-lock installation.
Note:
Do not proceed mounting until you have finished the electric check
Step 4: Mounting
Figure 8 Figure 9
A. With 6 screws unscrewed before, tighten the main part (together with rain shade) of intercom
on the back panel a
ccording to
diagram (8).
B. Push the front panel into the plastic frame, and tighten it with 6 screws a
ccording to
diagram (9).
Note: Make sure the screws have been tightened properly for better waterproof effect.
IP
3667
