| 3 - INSTALLING LCC44/LCC84 ON A WALL MOUNT BRACKET
Figure 20. The wall-mount plate of the LCC44/84
Wall Bracket
Figure 21. Marking the mounting surface for
drilling.
•
When it has been verified that there is no wiring or plumbing
in the wall behind the mounting position, use the plate itself
as a drilling template and mark with the pencil the centers and
outlines of the mounting holes. A spirit level can be useful to
assure that the mount is properly leveled.
Figure 22. Drilling the mounting holes .
•
Drill the four holes, using a drill or percussion drill with a bit
approriate to the substrate material (masonry/concrete, wood,
steel etc.) with the appropriate diameter and to the appropriate
depth for the anchor type being used.
•
Once the four mounting holes have been drilled, clear them of
residue and verify the appropriate depth of each.
•
Place the mounting plate against the wall in the correct
orientation (with the hole for the removed clevis pin on the
bottom) and align the four mounting holes centered on the
drilled holes.
•
Insert the four screws or anchors directly through the mounting
holes in the plate, tightening the screw anchors with your fingers
only sufficiently to keep them in place.
