3. Place the slip mat on top of the platter.
Make sure the 1byone logo on the mat
is facing up (Figure 2).
Figure 2
4
5
Included Items
Installing the turntable
Before installing the turntable, check the package contents to ensure all parts below
are included and free of visible damage. Please retain the original packaging materials
for exchange or return purposes.
• Mount the turntable on a level surface.
Turntable Platter and Belt Setup
1. Remove the protective packaging and ensure the
turntable is placed on a sturdy and level surface.
2. Remove the screw between the spindle and tonearm.
This screw is used for securing the tonearm base during
shipment and does not need to be reinstalled.
3. Insert the sub-platter into the turntable spindle located in the middle of the
turntable.
4. Loop the drive belt around the sub-platter and motor pulley (brass-colored).
1) Turntable Unit
2) Slip Mat
3) Turntable Platter
4) Counterweight
5) 45 RPM adapter
6) Drive Belt
7) Sub-platter
8) Power Adapter
9) Cartridge Alignment Protractor
10) Instruction Manual
• To avoid the effects of vibrations and acoustic pressure, do not mount the turntable
next to items such as speakers.
• The turntable may pick up radio static if placed next to a radio. Therefore, try to keep
the turntable away from transmission devices such as radios.
• If the turntable is near equipment (cell phone, etc.) that emits strong radio waves,
noise may occur.
5. Carefully place the main platter onto the sub-platter.
1. Using your hands, slowly rotate
the platter ten times in a clockwise
direction (Figure 1).
2. This step is for resetting the auto
mechanism, getting rid of any twists in
the belt and making sure the belt rides
smoothly along the drive rim on the
underside of the platter.
Figure 1
Rotating the Platter
