background image

Introduction

Thank you for purchasing 1byone Belt Drive Turntable with Built in Speakers. This 
instruction manual contains important information about safety, usage and disposal. 
Use the product as described and keep this manual for future reference. If you sell this 
turntable or pass it on, also give this manual to the new owner.

1

Safety Instructions

Read and understand this entire manual before using this product. Keep these 
instructions for future reference.
1. Do not use the turntable near water.
2. Only connect the turntable to a power outlet type as indicated on the marking label 
     or in the "Specifications" section of this instruction manual.
3. The turntable has a polarized plug (one pin is wider than the other). To reduce the risk 
    of electric shock, this plug is intended to fit into a polarized outlet in only one 
    orientation. If the plug does not fit fully into the outlet, reverse the plug. If it still does 
    not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
4. Protect the power cord from being walked on or pinched, particularly at the power 
    plug, at the point of connection between the plug and outlet and at the point of 
    connection between the power cable and speaker.
5. Do not overload wall outlets or extension cords as this will be a fire hazard and may 
    cause electric shock.
6. Never push objects of any kind into the turntable through openings as they may 
    touch dangerous voltage points or short out parts that could result in a fire or electric 
    shock. Never spill liquid of any kind on the product.
7. Do not attempt to service the turntable yourself as opening or removing body panels 
    may expose you to dangerous voltage or other hazards. Refer all servicing to qualified 
    service personnel.
8. Changes or modifications to the turntable not expressly approved by the party 
    responsible for compliance could void the user’s authority to operate the product.
9. Do not use attachments not recommended by the manufacturer as they may cause 
    hazards.
10. Only place on a flat, sturdy table or use with the cart, stand, tripod or 
       bracket as specified by the manufacturer or sold with the turntable. 
       When a cart is used, use caution when moving the cart/turntable 
       combination to avoid injury from tip-over.

Содержание Audio-Technica AT3600














Отзывы: