07
08
EN
DE
FR
ES
JP
IT
EN
DE
FR
ES
JP
IT
Note
Please do not attempt to open the back cover or power adapter as opening or
removing the cover may expose you to dangerous voltage or other hazards. There are
no user servicing components inside.
Note
This digital device does not exceed the Class B limits for radio noise emissions from
digital devices as set by the IC and the FCC. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Notes
If experiencing interference from a radio receiver, reorient or relocate the receiving
antenna.
Increase the separation between the device and the receiver.
Connect the device into an outlet on a circuit different from that to which the
receiver is connected
Consult the dealer or an experienced radio/TV technician for assistance.
Notes
The label is located on bottom of the product.
No naked flame sources, such as lighted candles, should be placed on the product.
The product is only intended to be used in moderate climates.
This device complies with Part 15 of the FCC/Rules and Industry Canada’s license-ex-
empt RSSs. Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.”
The exclamation mark inside an
equilateral triangle is intended to alert
the user to the presence of
important operating and mainte-
nance (servicing) instructions in the
literature accompanying the product.
The lightning flash with arrow symbol
inside an equilateral triangle is
intended to alert the user of the
presence of un-insulated “hazardous
voltage” within the product’s
enclosure, which may be of sufficient
magnitude to induce a risk of electric
shock.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
8. Do not defeat the safety of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prongs are
provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched, particularly at the plug
and the point where the cord exits from the product.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this product during lightning storms or when unused for long periods of
time.
12. Refer all servicing to qualified service personnel. Servicing is required when the
product has been damaged in any way such as the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the product, the
product has been exposed to rain or moisture and does not operate normally, or
has been dropped.
13 The product should not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the product.
FCC / IC WARNING
IMPORTANT WARNING
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE
Class II equipment symbol
This symbol indicates that
the turntable has a double system.
CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK, DO
NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
